NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A minimal scrap-wood rack that mounts to wall studs and keeps bar or pipe clamps off the floor and within reach.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Horizontal board Long enough to span two wall studs — adjust to your stud spacing. | 1 | 3/4" × 5 1/2" × 24" | Scrap wood | ☐ |
| Vertical side supports Depth sized to clear your deepest clamp's jaw. | 2 | 3/4" × 3 1/2" × 6" | Scrap wood | ☐ |
| Top strip | 1 | 3/4" × 1 1/2" × 24" | Scrap wood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Scrap wood board | 2 board ft | ☐ |
| Wood screws, assorted | 10 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.