NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A minimal scrap-wood rack that mounts to wall studs and keeps bar or pipe clamps off the floor and within reach.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Horizontal board Long enough to span two wall studs — adjust to your stud spacing. | 1 | 3/4" × 5 1/2" × 24" | Scrap wood | ☐ |
| Vertical side supports Depth sized to clear your deepest clamp's jaw. | 2 | 3/4" × 3 1/2" × 6" | Scrap wood | ☐ |
| Top strip | 1 | 3/4" × 1 1/2" × 24" | Scrap wood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Scrap wood board | 2 board ft | ☐ |
| Wood screws, assorted | 10 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Hand Saw, Tape Measure. Materials: Scrap wood board
Cut one horizontal board long enough to span two wall studs, two short vertical side supports sized to the depth of your deepest clamp, and one narrow top strip.
Tools: Drill / Driver. Materials: Scrap wood board, Wood screws, assorted
Attach the vertical supports to the horizontal board, then attach the top strip across them.
Tools: Drill / Driver. Materials: Wood screws, assorted
Mount the assembled rack to two wall studs for strength, then hang clamps by their jaws over the top strip.