NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-mounted sorter with three angled bins for mail or magazines, built from a single 1x2 and one piece of 1/4" plywood — a true scrap-bin project.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Frame stiles | 2 | 3/4" × 1 1/2" × 27 3/4" | 1x2 | ☐ |
| Frame rails | 4 | 3/4" × 1 1/2" × 11" | 1x2 | ☐ |
| Bin sides Cut at 25° leaving 3/4" on the short end — rip a 7-1/4" strip and crosscut them off it. | 6 | 1/4" × 7 1/4" × 4 1/8" | 1/4" plywood | ☐ |
| Bin fronts | 3 | 1/4" × 8" × 11" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x2 board, 10 ft (Pine) The frame. | 1 each | ☐ |
| 1/4" plywood or hardboard, 24" x 48" Bin sides and fronts. Sold this size off the shelf. | 1 each | ☐ |
| Pocket-hole screws, 1-1/4" | 20 each | ☐ |
| Brad nails or staples, 3/4"–1" | 30 each | ☐ |
| Wood glue and cyanoacrylate glue | 3 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.