NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A 30"-tall wall corner cabinet with a pie-cut door pair, sized to hang alongside standard wall cabinets and finished with a real hardwood face frame.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Shelves and top/bottom | 4 | 3/4" × 22 3/4" × 22 3/4" | 3/4" plywood (22-3/4" ripped strip) | ☐ |
| Sides | 2 | 3/4" × 11 3/4" × 30" | 3/4" plywood (11-3/4" ripped strip) | ☐ |
| Back support cleat | 1 | 3/4" × 2 1/2" × 30" | 1x3 | ☐ |
| Hanging cleats Longest-point measurement; one end cut at a 45° bevel. Add more under the other fixed shelves for heavier loads. | 2 | 3/4" × 1 1/2" × 21" | 1x2 | ☐ |
| Backs | 2 | 1/4" × 22" × 30" | 1/4" plywood | ☐ |
| Face frame stiles | 2 | 3/4" × 1 1/2" × 30" | 1x2 | ☐ |
| Face frame top rail | 2 | 3/4" × 1 1/2" × 10 1/2" | 1x2 | ☐ |
| Face frame bottom rail | 2 | 3/4" × 1 1/2" × 9 3/4" | 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, ripped into a 22-3/4" strip and an 11-3/4" strip, 8 ft each The leftover width from the 11-3/4" strip is enough for another wall cabinet if you're building more than one. | 1 sheet | ☐ |
| 1/4" plywood, half sheet, for the backs | 1 each | ☐ |
| 1x2 board, 8 ft, matching hardwood species | 2 each | ☐ |
| 1x3 board, 30", matching hardwood species | 1 each | ☐ |
| Concealed euro-style hinges, 1-1/4" overlay face frame | 2 each | ☐ |
| Pie-cut hinges, for joining the two doors | 2 each | ☐ |
| Screws, for hanging and attaching to neighboring cabinets | 20 each | ☐ |
| Cabinet doors or door-building materials | 2 each | ☐ |
| Pocket-hole screws, 3/4" and 1-1/4" | 30 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.