NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A 1x12 cabinet whose whole front tilts forward to present the trash can — gravity keeps it closed, a lid-support chain keeps it from face-planting. No catches, no springs.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Box sides | 2 | 3/4" × 11 1/4" × 29 1/4" | 1x12 | ☐ |
| Box top | 1 | 3/4" × 11 1/4" × 18" | 1x12 | ☐ |
| Box bottom shelf | 1 | 3/4" × 11 1/4" × 16 1/2" | 1x12 | ☐ |
| Back supports | 2 | 3/4" × 2 1/2" × 16 1/2" | 1x3 | ☐ |
| Front trim, 1x2 | 2 | 3/4" × 1 1/2" × 18" | 1x2 | ☐ |
| Front trim, 1x3 | 1 | 3/4" × 2 1/2" × 18" | 1x3 | ☐ |
| Door stiles | 2 | 3/4" × 2 1/2" × 25" | 1x3 | ☐ |
| Door rails | 2 | 3/4" × 2 1/2" × 13" | 1x3 | ☐ |
| Door shelf | 1 | 3/4" × 11 1/4" × 16" | 1x12 | ☐ |
| Door side wings Cut at 45° into the two triangular wings. | 1 | 3/4" × 11 1/4" × 11 1/4" | 1x12 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 6 ft Box sides, top, bottom shelf, and door parts. | 2 each | ☐ |
| 1x3, 6 ft Door frame, back supports, and front trim. | 2 each | ☐ |
| 1x2, 4 ft Front trim. | 2 each | ☐ |
| Plywood, 1/4", 24" x 14-1/4" The door's panel. | 1 each | ☐ |
| Narrow hinges with flat-head screws The inexpensive flat kind — mounted at the door's bottom edge. | 2 each | ☐ |
| Knob or pull | 1 each | ☐ |
| Lid support, chain, or wire Stops the door at its open angle. Not optional — toes. | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 25 each | ☐ |
| Brad nails, 3/4" and 1-1/4", 18 ga | 60 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.