NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small pocket-hole chair with tapered back legs and a shaped seat with cutouts at the rear corners for a leg-through fit.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Back support rails | 2 | 3/4" × 2 1/2" × 8" | Pine | ☐ |
| Front legs | 2 | 1 1/2" × 1 1/2" × 9 1/4" | Pine | ☐ |
| Back legs Optionally tapered on a table saw — top of taper is 1". | 2 | 1 1/2" × 1 1/2" × 20" | Pine | ☐ |
| Side aprons | 2 | 1 1/2" × 1 1/2" × 7 1/2" | Pine | ☐ |
| Front/back apron | 2 | 1 1/2" × 1 1/2" × 8" | Pine | ☐ |
| Seat top Rear corners relief-cut so the seat drops between the back legs and rails. | 1 | 3/4" × 11" × 12" | Plywood or MDF | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x3, 2 ft | 1 each | ☐ |
| Pine, 2x2, 8 ft | 1 each | ☐ |
| Plywood or MDF, 3/4", at least 11" x 12" Pine or another paint-grade panel works if you plan to stain instead of paint. | 1 each | ☐ |
| Pocket hole screws, 2-1/4" | 18 each | ☐ |
| Pocket hole screws, 1-1/4" | 4 each | ☐ |
| Wood glue | 2 oz | ☐ |
| Paint and finishing supplies | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.