NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A tall, narrow media cabinet built to fit a corner, with open component shelves up top and doored storage below.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Dividers | 2 | 3/4" × 15 3/4" × 10 1/2" | Plywood | ☐ |
| Center shelf | 1 | 3/4" × 15 3/4" × 20" | Plywood | ☐ |
| Shelves Ends cut to fit the corner angle. | 4 | 3/4" × 15 3/4" × 48" | Plywood | ☐ |
| Sides | 2 | 3/4" × 5 1/2" × 47 1/4" | Pine | ☐ |
| Back supports | 4 | 3/4" × 1 1/2" × 47 1/4" | Pine | ☐ |
| Back panel, center | 1 | 1/4" × 24 1/2" × 47 1/4" | Plywood | ☐ |
| Back panel, sides | 2 | 1/4" × 13" × 47 1/4" | Plywood | ☐ |
| Side face frame | 2 | 3/4" × 1 1/2" × 47 1/4" | Pine | ☐ |
| Shelf face frame trim | 3 | 3/4" × 1 1/2" × 46 1/2" | Pine | ☐ |
| Top trim, sides | 2 | 3/4" × 3 1/2" × 50 1/2" | Pine | ☐ |
| Top trim, back-right Both ends 45° off square, NOT parallel, long-point measurement. | 1 | 3/4" × 3 1/2" × 50 1/2" | Pine | ☐ |
| Top trim, back-left Both ends 45° off square, NOT parallel, long-point measurement. | 1 | 3/4" × 3 1/2" × 43 1/2" | Pine | ☐ |
| Top trim, front Both ends 45° off square, NOT parallel, long-point measurement. | 1 | 3/4" × 3 1/2" × 36 1/2" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet Ripped into 15-3/4" strips for the shelves — referred to as "1x16" boards in the cut list. | 1 each | ☐ |
| Pine, 1x6, 8 ft Substitute ripped-down plywood strips if you have a table saw. | 1 each | ☐ |
| Pine, 1x2, 8 ft | 5 each | ☐ |
| Plywood, 1/4", 4x8 sheet Back panel and door backs. | 1 each | ☐ |
| Pine, 1x4, 8 ft | 2 each | ☐ |
| Pine, 1x4, 6 ft | 1 each | ☐ |
| Base moulding, 5-1/4" 6 ft stick. | 1 each | ☐ |
| Pine, 1x3, 8 ft Door frames. | 2 each | ☐ |
| Cabinet door hinges | 2 pair | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Finish nails, 2" and 1-1/4" | 1 box | ☐ |
| Wood glue | 6 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.