NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A shallow two-panel rack with three 1x2 rails that cradles water bottles on their sides, sized to whatever length fits your cabinet and stackable with mounting tape.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| End panels | 2 | 3/4" × 5 1/2" × 8" | Pine 1x6 | ☐ |
| Rails 12" rack shown — cut to your own desired rack length minus 1-1/2". | 3 | 3/4" × 1 1/2" × 10 1/2" | Pine 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x6, 16 in per rack | 1 each | ☐ |
| Pine, 1x2 (3x the desired rack width) | 1 each | ☐ |
| 1-5/8" trim screws or 1-1/4" brad nails and wood glue | 1 box | ☐ |
| 120 grit sandpaper | 1 pack | ☐ |
| Mounting tape Only needed if stacking multiple racks. | 1 each | ☐ |
| Paint or stain Optional. | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.