NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A shallow two-panel rack with three 1x2 rails that cradles water bottles on their sides, sized to whatever length fits your cabinet and stackable with mounting tape.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| End panels | 2 | 3/4" × 5 1/2" × 8" | Pine 1x6 | ☐ |
| Rails 12" rack shown — cut to your own desired rack length minus 1-1/2". | 3 | 3/4" × 1 1/2" × 10 1/2" | Pine 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x6, 16 in per rack | 1 each | ☐ |
| Pine, 1x2 (3x the desired rack width) | 1 each | ☐ |
| 1-5/8" trim screws or 1-1/4" brad nails and wood glue | 1 box | ☐ |
| 120 grit sandpaper | 1 pack | ☐ |
| Mounting tape Only needed if stacking multiple racks. | 1 each | ☐ |
| Paint or stain Optional. | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Circular Saw, Random Orbit Sander. Materials: Pine, 1x6, 16 in per rack, Pine, 1x2 (3x the desired rack width), 120 grit sandpaper
Decide how long your water bottle organizer will be and cut the three 1x2 rails to that length minus 1-1/2". Cut two 1x6 end panels at 8" long. Sand any rough cut edges.
Tools: Drill / Driver. Materials: Pine, 1x2 (3x the desired rack width), 1-5/8" trim screws or 1-1/4" brad nails and wood glue
Screw or nail the 1x6 end panels to the 1x2 rails. One screw per joint is enough if screwing; if nailing, use glue and two nails per joint. The outer 1x2 rails stand vertically as side walls; the center 1x2 lies flat.
Materials: Mounting tape
If building multiple racks to stack, use mounting tape to hold them together.