NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A low upholstered slipper chair on a shaped 2x4 frame with a notched-leg seat joint. The woodworking is a real build; the finish is fabric and foam.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Back legs (A) Cut to the shaped profile; template the pair to match. | 2 | 1 1/2" × 3 1/2" × 31" | 2x4 | ☐ |
| Back apron (B) | 1 | 1 1/2" × 3 1/2" × 19" | 2x4 | ☐ |
| Top of back (C) Angle to match the chair's lean. | 1 | 1 1/2" × 1 1/2" × 19" | 2x2 | ☐ |
| Back supports (D) | 2 | 3/4" × 1 1/2" × 19" | 1x2 | ☐ |
| Seat front/back (E) | 2 | 3/4" × 3 1/2" × 20 1/2" | 1x4 | ☐ |
| Seat sides (F) | 2 | 3/4" × 3 1/2" × 22" | 1x4 | ☐ |
| Seat supports (G) Ends cut 40°, NOT parallel. | 4 | 1 1/2" × 1 1/2" × 6" | 2x2 | ☐ |
| Front legs (H) Notched to fit the seat-support triangle. | 2 | 1 1/2" × 1 1/2" × 13 1/2" | 2x2 | ☐ |
| Seat platform (I) | 1 | 3/4" × 20 1/2" × 20 1/2" | 3/4 in MDF | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft Back legs and back apron. | 1 each | ☐ |
| 1x4, 8 ft Seat frame. | 1 each | ☐ |
| 2x2, 8 ft Top rail, seat supports, front legs. | 1 each | ☐ |
| 1x2, 8 ft (or 40 in scrap) Back supports. | 1 each | ☐ |
| MDF or plywood, 3/4 in, 24 in x 24 in Seat platform. | 1 each | ☐ |
| Upholstery foam Seat and back. | 1 each | ☐ |
| Curtain panel, 84 in Covers the whole chair. | 1 each | ☐ |
| Wood screws, 2 in | 1 box | ☐ |
| Staples (upholstery) | 1 box | ☐ |
| Wood glue | 1 bottle | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.