NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A four-drawer 1x8 dresser on chunky 2x4 legs — every top and drawer face board is cut with a stop-block setup so every piece matches exactly.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top boards | 9 | 3/4" × 7 1/4" × 16" | Pine | ☐ |
| Top filler pieces | 3 | 3/4" × 3 1/2" × 16" | Pine | ☐ |
| Top trim Measure and cut to fit the actual glued-up top. | 2 | 3/4" × 1 1/2" × 65 1/4" | Pine | ☐ |
| Side panels | 4 | 3/4" × 7 1/4" × 24 1/2" | Pine | ☐ |
| Legs | 5 | 1 1/2" × 3 1/2" × 28 1/2" | Pine | ☐ |
| Frame rails | 3 | 3/4" × 1 1/2" × 63 3/4" | Pine | ☐ |
| Middle frame rail | 1 | 3/4" × 2 1/2" × 63 3/4" | Pine | ☐ |
| Front middle leg | 1 | 3/4" × 3 1/2" × 24 1/2" | Pine | ☐ |
| Back blocking | 4 | 3/4" × 1 1/2" × 9 1/2" | Pine | ☐ |
| Front blocking | 2 | 3/4" × 3 1/2" × 9 1/2" | Pine | ☐ |
| Drawer sides | 8 | 3/4" × 5 1/2" × 16" | Pine | ☐ |
| Drawer fronts/backs Measure each opening individually — width equals the opening minus 2-1/2". | 8 | 3/4" × 5 1/2" × 28 3/8" | Pine | ☐ |
| Drawer bottoms | 4 | 1/4" × 16" × 29 7/8" | 1/4" plywood | ☐ |
| Drawer faces Four boards join to make each of the four drawer faces. | 16 | 3/4" × 7 1/4" × 11 1/4" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x8, 8 ft | 5 each | ☐ |
| Pine, 1x6, 8 ft | 4 each | ☐ |
| Pine, 1x4, 8 ft | 1 each | ☐ |
| Pine, 1x3, 8 ft | 1 each | ☐ |
| Pine, 1x2, 8 ft | 5 each | ☐ |
| Pine, 2x4, 12 ft | 1 each | ☐ |
| Plywood, 1/4", 48" x 48" | 1 each | ☐ |
| Euro-style drawer slides, 16", white | 4 pair | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Pocket hole screws, 2-1/2" | 1 box | ☐ |
| Brad nails, 1-1/4" and 5/8" | 1 box | ☐ |
| Sandpaper, medium and fine grit | 6 sheet | ☐ |
| Stain and clear poly | 1 quart | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.