NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A floor-standing vanity with edge-glued 1x6 side panels, a pocket-holed face frame, and three real drawers on euro slides — sized to build your own top around your own sink.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side panel boards | 6 | 3/4" × 5 1/2" × 31 3/4" | 1x6, 8 ft | ☐ |
| Side trim | 4 | 3/4" × 1 1/2" × 18" | 1x2, 8 ft | ☐ |
| Back supports | 2 | 3/4" × 2 1/2" × 32" | 1x3, 8 ft | ☐ |
| Front legs | 2 | 3/4" × 3 1/2" × 31 3/4" | 1x4, 8 ft | ☐ |
| Face frame, top/bottom | 2 | 3/4" × 2 1/2" × 26 1/2" | 1x3, 8 ft | ☐ |
| Face frame, middle | 2 | 3/4" × 1 1/2" × 26 1/2" | 1x2, 8 ft | ☐ |
| Back panel boards | 2 | 3/4" × 5 1/2" × 31 3/4" | 1x6, 8 ft | ☐ |
| Drawer slide supports | 2 | 3/4" × 1 1/2" × 31 3/4" | 1x2, 8 ft | ☐ |
| Front trim Cut to fit. | 2 | 3/4" × 1 1/2" × 35" | 1x2, 8 ft | ☐ |
| Large drawer sides | 4 | 3/4" × 5 1/2" × 16" | 1x6, 8 ft | ☐ |
| Large drawer front/back | 4 | 3/4" × 5 1/2" × 23 3/4" | 1x6, 8 ft | ☐ |
| Top drawer sides | 2 | 3/4" × 3 1/2" × 16" | 1x4, 8 ft | ☐ |
| Top drawer front/back | 2 | 3/4" × 3 1/2" × 23 3/4" | 1x4, 8 ft | ☐ |
| Drawer bottoms | 3 | 1/4" × 16" × 25 1/4" | 1/4" plywood panel, 48" x 48" | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x6, 8 ft | 5 each | ☐ |
| 1x2, 8 ft | 3 each | ☐ |
| 1x3, 8 ft | 2 each | ☐ |
| 1x4, 8 ft | 2 each | ☐ |
| 1/4" plywood panel, 48" x 48" | 1 each | ☐ |
| Euro style drawer slides, 16 in, pair | 3 set | ☐ |
| Drawer slide back sockets | 3 each | ☐ |
| Bin pulls | 3 each | ☐ |
| Pocket hole screws, 1-1/4" | 100 each | ☐ |
| Brad nails, 1-1/4" | 60 each | ☐ |
| Wood glue | 5 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.