Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Outdoor Table
This DIY outdoor table is made out of 2x6 boards that are screwed together with pocket holes.
- Difficulty
- Easy
- Time
- 1.3–2.5 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Table top boards | 5 | 2" × 6" × 6" | — | ☐ |
| Legs | 4 | 2" × 6" × 28" | — | ☐ |
| Cross supports | 6 | 2" × 6" × 20" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Treated lumber boards, 2"x6"x8' | 5 board | ☐ |
| Treated lumber board, 2"x6"x10' | 1 board | ☐ |
| Treated lumber board, 2"x6"x6' | 2 board | ☐ |
| 150 grit sandpaper | 1 each | ☐ |
| 220 grit sandpaper (use any other grit in between these two for a better finish) | 1 each | ☐ |
| Box of 2" Kreg Blue-Kote screws (see tools list) | 1 each | ☐ |
| Box of small washers | 1 each | ☐ |
| Powder-coated legs from Semi-Exact (link in Extras tab) | 4 each | ☐ |
| Outdoor wood stain | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.