NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A 48" vanity cabinet with an open center shelf cut for plumbing, flanked by a door on one side and a drawer on the other — a full vanity cabinet, not a hutch that bridges over an existing one.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 20 1/4" × 35" | 3/4" plywood, ripped to 20-1/4" strips, full sheet | ☐ |
| Bottom | 1 | 3/4" × 20 1/4" × 46 1/2" | 3/4" plywood, ripped to 20-1/4" strips, full sheet | ☐ |
| Inner dividers | 2 | 3/4" × 20 1/4" × 31 1/2" | 3/4" plywood, ripped to 20-1/4" strips, full sheet | ☐ |
| End shelves | 2 | 3/4" × 20 1/4" × 12 1/2" | 3/4" plywood, ripped to 20-1/4" strips, full sheet | ☐ |
| Center open shelf Cut the back edge to clear plumbing before installing. | 1 | 3/4" × 20 1/4" × 20" | 3/4" plywood, ripped to 20-1/4" strips, full sheet | ☐ |
| Back supports, short | 2 | 3/4" × 3 1/2" × 12 1/2" | 1x4, 8 ft | ☐ |
| Back support, center | 1 | 3/4" × 3 1/2" × 20" | 1x4, 8 ft | ☐ |
| Front-to-back nailers | 2 | 3/4" × 1 1/2" × 20 1/4" | 1x2, 8 ft | ☐ |
| Face frame side stiles | 2 | 3/4" × 1 1/2" × 35" | 1x2, 8 ft | ☐ |
| Face frame top/bottom rails | 2 | 3/4" × 1 1/2" × 45" | 1x2, 8 ft | ☐ |
| Center shelf face stiles | 2 | 3/4" × 1 1/2" × 5 3/4" | 1x2, 8 ft | ☐ |
| Door/drawer opening stiles | 2 | 3/4" × 1 1/2" × 22 3/4" | 1x2, 8 ft | ☐ |
| Kick rail | 1 | 3/4" × 3 1/2" × 45" | 1x4, 8 ft | ☐ |
| Drawer sides | 2 | 1/2" × 3 1/2" × 5 1/2" | 1/2" x 3-1/2" board, 9 ft total (drawer box) | ☐ |
| Drawer front/back | 2 | 1/2" × 3 1/2" × 18 1/4" | 1/2" x 3-1/2" board, 9 ft total (drawer box) | ☐ |
| Drawer bottom | 1 | 1/4" × 17 3/4" × 4 3/4" | 1/4" plywood, quarter sheet | ☐ |
| Door stiles | 4 | 3/4" × 2 1/2" × 16" | 1x3, 12 ft | ☐ |
| Door rails | 4 | 3/4" × 2 1/2" × 9 3/4" | 1x3, 12 ft | ☐ |
| Door panels | 2 | 1/2" × 10 3/4" × 16" | 1/2" plywood, quarter sheet | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, ripped to 20-1/4" strips, full sheet | 1 each | ☐ |
| 1x4, 8 ft | 1 each | ☐ |
| 1x2, 8 ft | 3 each | ☐ |
| 1x3, 12 ft | 1 each | ☐ |
| 1/2" plywood, quarter sheet | 1 each | ☐ |
| 1/2" x 3-1/2" board, 9 ft total (drawer box) | 1 each | ☐ |
| 1/4" plywood, quarter sheet | 1 each | ☐ |
| Non-mortise hinges, pair | 2 set | ☐ |
| Pocket hole screws, 1" and 1-1/4" | 70 each | ☐ |
| Brad nails, 1-1/4" | 60 each | ☐ |
| Knobs and pulls | 3 each | ☐ |
| Euro drawer slides, 16 in, pair | 1 set | ☐ |
| Wood glue | 5 oz | ☐ |
| Sandpaper | 4 sheet | ☐ |
| Paint, primer or stain and poly | 1 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.