NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-mounted magazine rack built entirely from a single 1x3 board, angled so covers face outward.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bottom | 1 | 3/4" × 2 1/2" × 10" | 1x3 | ☐ |
| Back Angled to tilt magazines forward, covers facing out. | 1 | 3/4" × 2 1/2" × 12" | 1x3 | ☐ |
| Sides Angled top edge to match the back piece. | 2 | 3/4" × 2 1/2" × 9" | 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine board, 1x3, 8 ft | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 12 each | ☐ |
| Wood glue | 2 oz | ☐ |
| Wood filler | 1 each | ☐ |
| Paint | 4 oz | ☐ |
| Hanging hardware or Command strips | 1 set | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.