NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A hutch unit for a modular bar system, built around a removable interlocking plywood wine grid that slides out through the front.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 11 1/2" × 34" | 3/4" plywood (ripped strip) or 1x12 | ☐ |
| Side trim | 4 | 3/4" × 1 1/2" × 11 1/2" | 1x2 | ☐ |
| Legs | 4 | 1 1/2" × 1 1/2" × 34" | 2x2 | ☐ |
| Shelf | 1 | 3/4" × 11 1/2" × 14 3/4" | 3/4" plywood (ripped strip) or 1x12 | ☐ |
| Shelf trim and top support | 3 | 3/4" × 1 1/2" × 14 3/4" | 1x2 | ☐ |
| Top | 1 | 3/4" × 11 1/2" × 17 3/4" | 3/4" plywood (ripped strip) or 1x12 | ☐ |
| Top trim | 1 | 3/4" × 1 1/2" × 17 3/4" | 1x2 | ☐ |
| Top front trim | 1 | 3/4" × 2 1/2" × 17 3/4" | 1x3 | ☐ |
| Wine grid, tall dividers Clamp all three together and cut as a stack for identical slots. | 3 | 1/4" × 13 3/4" × 33 1/4" | 1/4" plywood | ☐ |
| Wine grid, short dividers Clamp together and cut as a stack. | 7 | 1/4" × 13 3/4" × 14 3/4" | 1/4" plywood | ☐ |
| Back | 1 | 1/4" × 17 3/4" × 34 3/4" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, half sheet, ripped into 11-1/2" strips Or substitute solid 1x12 — measure your actual board width and adjust measurements. | 1 each | ☐ |
| 1/4" plywood, full sheet | 1 each | ☐ |
| 2x2 board, 8 ft (Pine) | 2 each | ☐ |
| 1x3 board, 2 ft (Pine) | 1 each | ☐ |
| 1x2 board, 8 ft (Pine) | 1 each | ☐ |
| Pocket-hole screws, 1-1/4" | 24 each | ☐ |
| Finish nails, 1-1/4" | 60 each | ☐ |
| Wood glue | 6 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.