NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A four-leg plywood pedestal built from ripped-and-joined veneer strips — a different construction from this catalog's boxy 2x6 round-table base, meant for a separately-sourced round or square top.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Leg pieces, wide | 4 | 3/4" × 16" × 28 1/2" | 3/4" plywood, veneer, full sheet | ☐ |
| Leg pieces, narrow | 4 | 3/4" × 15 1/4" × 28 1/2" | 3/4" plywood, veneer, full sheet | ☐ |
| End caps | 4 | 3/4" × 3 1/2" × 28 1/2" | 1x4, matching wood species, 10 ft total | ☐ |
| Reinforcement blocks Cut from scrap to reinforce leg-set joints. | 8 | 3/4" × 2" × 6" | 3/4" plywood, veneer, full sheet | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, veneer, full sheet | 1 each | ☐ |
| 1x4, matching wood species, 10 ft total | 1 each | ☐ |
| Brad nails, 1-1/4" | 60 each | ☐ |
| Pocket hole screws, 1-1/4" | 30 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Mending plates | 4 each | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.