NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Add a drawer and shelf to your Kreg Workbench frame to give you plenty of storage for all your screws and jigs!
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bottom Shelf | 1 | 3/4" × 19" × 27" | — | ☐ |
| Back Panel | 1 | 3/4" × 5" × 27" | — | ☐ |
| Front Spacer Blocks | 2 | 3/4" × 1" × 5" | — | ☐ |
| Drawer Braces | 2 | 3/4" × 5" × 18" | — | ☐ |
| Drawer Box Sides | 2 | 3/4" × 4" × 16" | — | ☐ |
| Drawer Box Front/Back Pieces | 2 | 3/4" × 4" × 21" | — | ☐ |
| Drawer Bottom | 1 | 1/4" × 16" × 23" | — | ☐ |
| Drawer Front | 1 | 3/4" × 5" × 23" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" 4'x4' sheet | 1 board | ☐ |
| Plywood, 1/4" 2'x2' sheet | 1 board | ☐ |
| 3/4" coarse thread pocket hole screws | 18 each | ☐ |
| 1 1/4" coarse thread pocket hole screws | 18 each | ☐ |
| 1 1/4" fine thread pocket hole screws | 10 each | ☐ |
| Pair 16" ball bearing drawer slides | 1 each | ☐ |
| Drawer pull or knob | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.