NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A full-size captain's bed built from three separate cubby boxes — one end cubby, two side cubbies — joined by a center slat platform, unlike the joined bench-module design used elsewhere here.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Cubby sides | 6 | 3/4" × 11 1/4" × 15" | 1x12, 8 ft | ☐ |
| Cubby dividers | 3 | 3/4" × 11 1/4" × 12 3/4" | 1x12, 8 ft | ☐ |
| End cubby top/bottom | 2 | 3/4" × 11 1/4" × 54" | 1x12, 8 ft | ☐ |
| Side cubby top/bottom | 4 | 3/4" × 11 1/4" × 62" | 1x12, 8 ft | ☐ |
| Vertical trim | 6 | 3/4" × 1 1/2" × 12" | 1x2, 8 ft | ☐ |
| End top/bottom trim | 2 | 3/4" × 1 1/2" × 55 1/2" | 1x2, 8 ft | ☐ |
| Side top/bottom trim | 4 | 3/4" × 1 1/2" × 63 1/2" | 1x2, 8 ft | ☐ |
| Center support cleats | 2 | 3/4" × 2 1/2" × 63 1/2" | 1x3, 8 ft | ☐ |
| Center support slats | 11 | 3/4" × 2 1/2" × 30 1/2" | 1x3, 8 ft | ☐ |
| Cubby backs Cut to fit each cubby's back opening. | 3 | 1/4" × 15" × 96" | 1/4" plywood, ripped to 15 in strips, full sheet | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 8 ft | 6 each | ☐ |
| 1/4" plywood, ripped to 15 in strips, full sheet | 1 each | ☐ |
| 1x2, 8 ft | 6 each | ☐ |
| 1x3, 8 ft | 5 each | ☐ |
| Wood screws, 2" | 60 each | ☐ |
| Wood screws, 1-1/4" | 60 each | ☐ |
| Finish nails, 1-1/4" and 2" | 100 each | ☐ |
| Wood glue | 6 oz | ☐ |
| Wood filler | 3 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.