Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Floating Adjustable Shelves
How to build a shelf that can be hung at any height or used on the floor with adjustable shelves using the Kreg Shelf Pin Jig
- Difficulty
- Beginner
- Time
- 1.8–3.5 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 3 | 3/4" × 11" × 48" | — | ☐ |
| Top & bottom | 2 | 3/4" × 10" × 11" | — | ☐ |
| Shelves | 5 | 3/4" × 10" × 11" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 1x12 96" | 3 board | ☐ |
| Shelf pins | 20 each | ☐ |
| Wood screws | 8 each | ☐ |
| 120 grit sandpaper | 1 each | ☐ |
| 1 1/4" Kreg pocket hole screws | 40 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.