NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A simple angled A-frame display stand built from two identical 1x3 frames, sized to hold a row of buckets or baskets at a lean.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Frame boards | 10 | 3/4" × 2 1/2" × 35" | Pine 1x3 | ☐ |
| Frame cross braces | 4 | 3/4" × 2 1/2" × 14" | Pine 1x3 | ☐ |
| Center cross support Scribed to fit after the frames are assembled, not cut to a fixed length up front. | 2 | 3/4" × 2 1/2" × 35" | Pine 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x3, 8 ft | 6 each | ☐ |
| Pocket hole screws, 1-1/4", or 2" self-tapping screws | 1 box | ☐ |
| Brad nails or staples, 1-1/4" | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
| Buckets or baskets Not included in the cost estimate — pick sizes that fit your own frame spacing. | 9 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.