Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

Coat Rack from Scraps

A wall-mounted coat rack with hand-shaped wooden hooks, built entirely from offcut scraps rather than a purchased cut list.

Cut list

Part	Qty	T × W × L	Material	✓
Hook blanks Adjust size and quantity to your own scraps — no set rule. Bottom cut at 45°; hook face cut at 65° starting 1/4" from the top corner.	6	3/4" × 1 1/2" × 4"	Scrap wood	☐
Backer boards Match each backer's width to its hook so the two read as one shape. Length and layout are entirely up to your own scrap sizes.	6	3/4" × 1 1/2" × 6"	Scrap wood	☐

Item	Qty	✓
Scrap wood, assorted sizes and species The whole point of this project — no fixed shopping list, use what you already have on hand.	1 each	☐
Finish nails or wood screws, assorted	1 box	☐
Wall-mounting screws and anchors	1 set	☐
Finish	1 can	☐

Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.