NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A full-size outdoor sofa with five mitered X panels forming the back, built for cushions rather than bare-wood seating.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Large X pieces Both ends cut at 30° off square, ends parallel. | 10 | 3/4" × 1 1/2" × 20 13/16" | Pine 1x2 | ☐ |
| Small X pieces Both ends cut at 30° off square, ends not parallel, longest point measurement. | 20 | 3/4" × 1 1/2" × 10 3/8" | Pine 1x2 | ☐ |
| X ends | 10 | 1 1/2" × 1 1/2" × 12 1/8" | Pine 2x2 | ☐ |
| X tops/bottoms | 7 | 1 1/2" × 2 1/2" × 23" | Pine 2x3 | ☐ |
| Side top trim | 2 | 3/4" × 1 1/2" × 23" | Pine 1x2 | ☐ |
| Legs | 4 | 1 1/2" × 1 1/2" × 33 1/2" | Pine 2x2 | ☐ |
| Side aprons | 2 | 1 1/2" × 5 1/2" × 23" | Pine 2x6 | ☐ |
| Front/back aprons | 2 | 1 1/2" × 5 1/2" × 72" | Pine 2x6 | ☐ |
| Back centers | 2 | 1 1/2" × 1 1/2" × 17 1/4" | Pine 2x2 | ☐ |
| Back top | 1 | 1 1/2" × 2 1/2" × 72" | Pine 2x3 | ☐ |
| Back top trim | 1 | 3/4" × 1 1/2" × 72" | Pine 1x2 | ☐ |
| Cleats Set the back cleat slightly lower than the front for a reclined seat. | 2 | 1 1/2" × 1 1/2" × 72" | Pine 2x2 | ☐ |
| Seat slats Cut to fit; add more if your cushions are soft. | 16 | 3/4" × 2 1/2" × 23" | Pine 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x2, 8 ft X panels. | 7 each | ☐ |
| Pine, 2x2, 8 ft X ends, back centers, cleats. | 7 each | ☐ |
| Pine, 2x3, 8 ft | 3 each | ☐ |
| Pine, 2x6, 8 ft Side and front/back aprons. | 2 each | ☐ |
| Pine, 1x3, 8 ft Seat slats. | 4 each | ☐ |
| Unfinished wood curtain rod finials Decorative detail on the X ends. | 4 each | ☐ |
| Pocket hole screws, assorted | 1 box | ☐ |
| Wood glue | 8 oz | ☐ |
| Exterior wood finish | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.