NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-mounted plate rack from two 1x4s and two 1x2s — vertical slots hold plates on display and let them drip-dry. A one-board-bundle build.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 3 1/2" × 32" | 1x4 | ☐ |
| Shelves | 3 | 3/4" × 3 1/2" × 28 1/2" | 1x4 | ☐ |
| Rails and back supports | 5 | 3/4" × 3 1/2" × 28 1/2" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x4 board, 8 ft (Pine) Sides, shelves, rails. | 2 each | ☐ |
| 1x2 board, 8 ft (Pine) Back supports and cleats. | 2 each | ☐ |
| Wood screws, 3" For hanging into studs — size to your wall. | 8 each | ☐ |
| Finish nails, 1-1/4" | 40 each | ☐ |
| Wood glue | 3 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.