NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Simple 1x12-and-1x4 shelf covers that clip onto existing wire shelving brackets — a fast way to turn wire closet shelving into solid wood shelves without removing the hardware.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Shelf board (representative 36 in shelf) Cut to your own desired shelf length. | 1 | 3/4" × 11 1/4" × 36" | 1x12, 3 ft (per shelf, representative 36 in length) | ☐ |
| Front trim (representative 36 in shelf) Cut to match the shelf board length. | 1 | 3/4" × 3 1/2" × 36" | 1x4, 3 ft (per shelf, representative 36 in length) | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Vertical shelf track standards | 4 each | ☐ |
| Shelf brackets, 11–12 in long | 8 each | ☐ |
| Horizontal hang track (optional) | 1 each | ☐ |
| 1x12, 3 ft (per shelf, representative 36 in length) | 2 each | ☐ |
| 1x4, 3 ft (per shelf, representative 36 in length) | 1 each | ☐ |
| Brad nails, 1-1/4", or pocket hole screws | 20 each | ☐ |
| Short wood screws, for securing shelves to brackets | 16 each | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Materials: Vertical shelf track standards
If you want the wall tracks to match your walls, spray paint them and let dry before installing, or purchase white tracks for white walls.
Tools: Drill / Driver. Materials: Vertical shelf track standards, Horizontal hang track (optional)
Secure the vertical track standards to the wall either directly into studs (every other stud for light loads, every stud for heavy loads) or via a horizontal hang track installed across the top. Keep the tops of all standards level at your desired top shelf height.
Materials: Shelf brackets, 11–12 in long
Clip the shelf brackets into the vertical tracks wherever you want a shelf.
Tools: Brad Nailer, Circular Saw. Materials: 1x12, 3 ft (per shelf, representative 36 in length), 1x4, 3 ft (per shelf, representative 36 in length), Brad nails, 1-1/4", or pocket hole screws
Cut a 1x12 to your desired shelf length. Nail and glue a 1x4 to the front edge with 1-1/4" brad nails, or use hidden pocket holes for a more polished look.
Tools: Drill / Driver, Random Orbit Sander. Materials: Short wood screws, for securing shelves to brackets, Primer and paint, or stain and poly
Paint or stain the shelves as desired, then secure to the brackets with short screws sized to your bracket hardware, driving about 1/2" into the wood.