NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small 1x6 box with hole-sawed cutouts for a wine bottle and jigsawed channels that lock stemware by its foot — sized to your own bottle and glasses, not a fixed diagram.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Long sides | 2 | 3/4" × 5 1/2" × 16" | 1x6, 4 ft | ☐ |
| Short sides | 2 | 3/4" × 5 1/2" × 7" | 1x6, 4 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x6, 4 ft | 1 each | ☐ |
| Trim screws, 1-5/8" | 8 each | ☐ |
| Wood glue | 2 oz | ☐ |
| Hole saw, 3-1/4 in | 1 each | ☐ |
| Hole saw, 1 in | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Hole Saw Kit. Materials: 1x6, 4 ft
Mark and cut the larger hole for the wine bottle body with a 3-1/2" hole saw. Test your actual bottle to position the smaller neck hole, then cut it with a 1-1/2" hole saw, before assembling the box.
Tools: Drill / Driver. Materials: 1x6, 4 ft, Trim screws, 1-5/8", Wood glue
Assemble the box with glue and the trim screws.
Tools: Hole Saw Kit, Jigsaw. Materials: 1x6, 4 ft
Measure your own wine glasses and cut the stemware slots to fit, checking that the glasses don't rub against each other.