Easy Wall Mail or Magazine Bin Shelf

Build the 1x2 frame with 3/4" pocket holes and 1-1/4" screws. Use the bin sides themselves as spacers to set the middle rails, so you don't have to measure the spacing.

Cut the angled bin sides (25°, 3/4" short end) and glue-and-nail or staple them to the frame, flush to the back, with 3/4" or 1" fasteners. The angle tips each bin back so contents stay put.

Glue the bin fronts on with cyanoacrylate glue and let it fully cure before moving the piece. Add a 1/4" plywood back with glue and short nails if you want it enclosed. Finish and hang on the wall.