NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A pull wagon built like a real steel one — a 1x12 crate on casters, decorative metal or lath ribs, and a pivoting handle with a dowel grip and a deliberately weak shear pin.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bottom | 1 | 3/4" × 11 1/4" × 28 1/2" | 1x12 | ☐ |
| Front and back | 2 | 3/4" × 11 1/4" × 8 1/2" | 1x12 | ☐ |
| Sides | 6 | 3/4" × 2 1/2" × 30" | 1x3 | ☐ |
| Decorative strips Cut to whatever thickness/width the decorative material actually is — dimensions here are nominal for thin lath. | 8 | 1/8" × 1" × 8 1/2" | Decorative metal or wood lath | ☐ |
| Handle | 1 | 3/4" × 1 1/2" × 30" | 1x2 | ☐ |
| Handle grip | 1 | 1" × 1" × 7" | 1" dowel | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 4 ft Bottom and end panels. | 1 each | ☐ |
| 1x3, 8 ft Side rails. | 2 each | ☐ |
| 1x2, 30" Handle. | 1 each | ☐ |
| Wood dowel, 1" diameter, 7" long Handle grip. | 1 each | ☐ |
| Decorative metal or wood lath strips 72" total, cut into eight 8-1/2" strips. | 6 linear ft | ☐ |
| Caster wheels, 4", non-marking Two swivel, two fixed — or all four swivel. | 4 each | ☐ |
| L brackets, 3" Handle pivot mount. | 2 each | ☐ |
| Shear pin Deliberately the weakest link in the handle assembly — designed to break before the frame does under an overload. | 1 each | ☐ |
| Wood screws, 3/4" Caster wheels and decorative strips. | 20 each | ☐ |
| Self-tapping wood screws, 2" Crate assembly. | 20 each | ☐ |
| Pocket hole screws, 1-1/4" | 8 each | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.