NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A rolling shop cart with a recessed top that swaps interchangeable inserts — a flat bench today, a miter-saw station or Kreg-jig station tomorrow.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top and base panels | 2 | 3/4" × 24" × 36" | 3/4" plywood/MDF | ☐ |
| Shelf panel | 1 | 3/4" × 23 3/4" × 36" | 3/4" plywood/MDF | ☐ |
| Back | 1 | 1/4" × 23" × 36" | 1/4" plywood | ☐ |
| Base/top frame long | 4 | 3/4" × 3 1/2" × 37 1/2" | 1x4 | ☐ |
| Base/top frame short | 4 | 3/4" × 3 1/2" × 24" | 1x4 | ☐ |
| Leg halves Two laminated per leg. | 8 | 3/4" × 2 1/2" × 21" | 1x3 | ☐ |
| Side shelf supports | 2 | 3/4" × 2 1/2" × 19" | 1x3 | ☐ |
| Shelf ledger supports | 2 | 3/4" × 1 1/2" × 23 3/4" | 1x2 | ☐ |
| Caster mount boards Added at the bottom to give the casters solid backing. | 2 | 3/4" × 2 1/2" × 24" | 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" MDF or plywood, 4x8 sheet Top, base panel, and inserts. | 2 each | ☐ |
| 1/4" plywood, 2x4 ft Back. | 1 each | ☐ |
| 1x3 board, 8 ft (Pine) Legs and supports. | 3 each | ☐ |
| 1x4 board, 8 ft (Pine) Base and top frames. | 4 each | ☐ |
| 1x2 board, 8 ft (Pine) Shelf supports. | 1 each | ☐ |
| Pocket-hole screws, 1-1/4" | 80 each | ☐ |
| Locking casters, 3" All four corners, at least two locking. | 4 each | ☐ |
| Wood glue | 6 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.