NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A splayed-leg kitchen produce rack with three slide-out slatted trays, braced with angled 2x2 crosspieces for stability.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1 1/2" × 1 1/2" × 41 1/2" | Pine 2x2 | ☐ |
| Side drawer glides | 16 | 3/4" × 2 1/2" × 23 1/2" | Pine 1x3 | ☐ |
| Long-point-to-short-point braces Both ends cut at 60° off square, parallel to each other. | 2 | 1 1/2" × 1 1/2" × 41" | Pine 2x2 | ☐ |
| Longest-point braces One end cut at 60° off square, the other at 30° off square, same direction but not parallel. | 4 | 1 1/2" × 1 1/2" × 20 1/2" | Pine 2x2 | ☐ |
| Front/back supports | 4 | 3/4" × 2 1/2" × 25 1/4" | Pine 1x3 | ☐ |
| Drawer sides | 14 | 3/4" × 1 1/2" × 23 1/2" | Pine 1x2 | ☐ |
| Drawer ends | 14 | 3/4" × 1 1/2" × 20 1/2" | Pine 1x2 | ☐ |
| Drawer slats | 49 | 3/4" × 2 1/2" × 23 1/2" | Pine 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 2x2, 8 ft | 4 each | ☐ |
| Pine, 1x3, 8 ft | 17 each | ☐ |
| Pine, 1x2, 8 ft | 7 each | ☐ |
| Brad nails, 1-1/4" and 2" | 1 box | ☐ |
| Wood screws, 2", self-tapping | 1 box | ☐ |
| Pocket hole screws, 2-1/2" Recommended for the front/back supports if using a pocket hole jig. | 1 box | ☐ |
| Wood glue | 3 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.