NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A 1x12-leg vanity table topped with a two-shelf hutch built for a light-up mirror — a makeup vanity, not a bathroom fixture, sized around your own mirror rather than a fixed one.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 2 | 3/4" × 11 1/4" × 29 1/4" | 1x12, 10 ft | ☐ |
| Tabletop | 1 | 3/4" × 11 1/4" × 53" | 1x12, 10 ft | ☐ |
| Aprons Measure the actual distance between the legs at the tabletop before cutting. | 2 | 3/4" × 3 1/2" × 50 1/2" | 1x4, 10 ft | ☐ |
| Hutch top | 1 | 3/4" × 7 1/4" × 53" | 1x8, 8 ft | ☐ |
| Hutch sides and dividers | 4 | 3/4" × 7 1/4" × 20 3/4" | 1x8, 8 ft | ☐ |
| Hutch shelves | 2 | 3/4" × 7 1/4" × 11 3/4" | 1x8, 8 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 10 ft | 1 each | ☐ |
| 1x4, 10 ft | 1 each | ☐ |
| 1x8, 8 ft | 2 each | ☐ |
| Pocket hole screws, 1-1/4" | 30 each | ☐ |
| Brad nails, 1-1/4" | 40 each | ☐ |
| Wood glue | 3 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Pocket Hole Jig. Materials: 1x12, 10 ft, Pocket hole screws, 1-1/4"
Drill three pocket holes on one end of each leg board. Attach to the underside of the tabletop with 1-1/4" pocket hole screws, leaving a 1/2" overhang on each end.
Tools: Drill / Driver, Pocket Hole Jig. Materials: 1x4, 10 ft, Pocket hole screws, 1-1/4"
Measure the distance between the two legs at the tabletop. Cut the aprons to this measurement, drill pocket holes on each end and along one edge, and attach with 1-1/4" pocket hole screws.
Tools: Brad Nailer. Materials: 1x8, 8 ft, Brad nails, 1-1/4", Wood glue
Build the two hutch shelf sections with brad nails and glue.
Tools: Brad Nailer. Materials: 1x8, 8 ft, Brad nails, 1-1/4", Wood glue
Attach the hutch top to the two shelf sections with brad nails and glue.
Tools: Drill / Driver
Attach the assembled hutch to the base with screws.
Tools: Random Orbit Sander. Materials: Primer and paint, or stain and poly
Sand all surfaces and apply primer and paint, or stain and poly.