NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A simple two-board shelf sized to slide into the odd, plumbing-crowded space under a kitchen sink, with either a pass-through back or a full plywood back panel.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side boards 10" tall example — cut to about 1" less than your cabinet opening height. | 2 | 3/4" × 9 1/4" × 10" | 1x board, in your desired depth (1x8, 1x10, or 1x12) | ☐ |
| Shelf board 24" wide example — cut 2" narrower than your desired final width. | 1 | 3/4" × 9 1/4" × 22" | 1x board, in your desired depth (1x8, 1x10, or 1x12) | ☐ |
| Back panel | 1 | 1/4" × 22" × 10" | 1x8 board or 1/4" plywood, for the back | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x board, in your desired depth (1x8, 1x10, or 1x12) | 1 each | ☐ |
| 1x8 board or 1/4" plywood, for the back 1x8 for a pass-through back, plywood to cover the full back. | 1 each | ☐ |
| 1-1/4" brad nails or 1-1/2" SPAX self-tapping screws About 10 screws needed if not using a brad nailer. | 1 box | ☐ |
| Wood glue | 1 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.