NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A caster-mounted push scooter built from scrap plywood and 2x2s, with a 10°-angled front for handlebar clearance.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Front Bottom end beveled 10° off square. | 1 | 3/4" × 2 1/2" × 11 5/8" | Plywood | ☐ |
| Bottom | 1 | 3/4" × 15 3/4" × 8" | Plywood | ☐ |
| Center support Front cut at 10°. | 1 | 1 1/2" × 1 1/2" × 10 5/8" | Pine, 2x2 | ☐ |
| Back legs Both ends cut at 10°, parallel to each other, long point to short point. | 2 | 3/4" × 1 1/2" × 4 5/8" | Pine, 1x2 | ☐ |
| Back support Both ends cut at 10°, not parallel, long point to long point. | 1 | 1 1/2" × 1 1/2" × 4 1/4" | Pine, 2x2 | ☐ |
| Seat Front cut at 10° off square, long-point measurement. | 1 | 3/4" × 6" × 12 3/8" | Plywood | ☐ |
| Seat backrest | 1 | 3/4" × 1 1/2" × 5" | Pine, 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", scraps | 4 sq ft | ☐ |
| Pine, 1x2, scraps | 1 each | ☐ |
| Pine, 2x2, scraps | 1 each | ☐ |
| Dowel rod, 3/4", 8 in Handlebars. | 1 each | ☐ |
| Non-marking swivel caster wheels, with screws Full swivel matters for steering — fixed casters make this hard to ride. | 4 each | ☐ |
| Self-tapping screws, 1-1/2" and 2-1/2" | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.