NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A whole built-in loft system for a tiny house — a queen bed with under-bed drawers, a storage wall, a shelf, and a loft floor above, all tied into the structure.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Wall posts One at 52", one at 71" — cut to your ceiling and loft heights. | 2 | 3 1/2" × 3 1/2" × 52" | 4x4 | ☐ |
| Wall studs | 4 | 1 1/2" × 3 1/2" × 53" | 2x4 | ☐ |
| Ladder supports Two at 13", one at 8". | 3 | 1 1/2" × 3 1/2" × 13" | 2x4 | ☐ |
| Wall back panel | 1 | 1/4" × 45 3/4" × 60" | 1/4" plywood or paneling | ☐ |
| Hidden storage door | 1 | 3/4" × 12 3/4" × 52 3/4" | 3/4" plywood | ☐ |
| Bed long frame rails | 2 | 1 1/2" × 3 1/2" × 80" | 2x4 | ☐ |
| Bed cross supports | 4 | 1 1/2" × 3 1/2" × 16 1/2" | 2x4 | ☐ |
| Bed mattress rail (long) | 1 | 1 1/2" × 7 1/4" × 80" | 2x8 | ☐ |
| Bed mattress supports | 4 | 1 1/2" × 7 1/4" × 58 1/2" | 2x8 | ☐ |
| Wall cleats 76", 80", and length of room (e.g. 94-1/2") — measure your space. | 3 | 1 1/2" × 3 1/2" × 80" | 2x4 | ☐ |
| Loft floor joists | 4 | 1 1/2" × 3 1/2" × 82" | 2x4 | ☐ |
| Drawer sides / fronts / backs Cut to fit your openings and slides — the given sizes assume perfect stock. | 12 | 3/4" × 5 1/2" × 24" | 1x6 | ☐ |
| Drawer / door faces Cut to fit; 1/8" gap all around. | 4 | 3/4" × 16 1/4" × 24 1/4" | 3/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 4x4, 6 ft (Pine / SPF) Wall posts — the structural backbone. | 2 each | ☐ |
| 2x4, 8 ft (SPF / Pine) Wall framing, bed supports, wall cleats, loft floor framing. | 14 each | ☐ |
| 2x8, 8 ft (SPF / Pine) Bed mattress framing. | 1 each | ☐ |
| 2x8, 10 ft (SPF / Pine) Bed mattress framing. | 2 each | ☐ |
| 1x6, 8 ft (Pine) Drawer boxes. | 3 each | ☐ |
| 2x6 tongue-and-groove flooring Loft floor / ceiling above. | 40 sq ft | ☐ |
| 1/4" plywood Drawer bottoms and shoe-storage backs. | 1 sheet | ☐ |
| Beadboard, paneling, or 1x6 T&G Back of the storage wall. | 1 sheet | ☐ |
| 3/4" plywood Drawer and door faces. | 1 sheet | ☐ |
| 24" bottom-mount drawer slides | 3 pair | ☐ |
| Hinges Add clasps/hasps if not self-closing. | 4 set | ☐ |
| Knobs or handles | 6 each | ☐ |
| Black pipe (ladder and railing) Build the railing to a real guardrail spec — pipe as shown is not code-approved. | 1 set | ☐ |
| 5" lag screws Anchoring the 4x4 posts to wall studs. |
| 8 each |
| ☐ |
| Structural / pocket screws and nails 2-1/2" pocket screws, 2-3/4" self-tapping wood screws, 1-1/4" nails. | 1 box | ☐ |
| Wood glue | 16 oz | ☐ |
| Finish | 1 kit | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.