Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Table Lamp
Creating your own lighting is easier than you might think.
- Difficulty
- Intermediate
- Time
- 4.8–9 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Post | 4 | 1" × 1" × 16" | — | ☐ |
| Base | 2 | 3/4" × 5" × 11" | — | ☐ |
| Short Brace | 4 | 1" × 1" × 2" | — | ☐ |
| Long Brace | 2 | 1" × 1" × 5" | — | ☐ |
| Foot | 4 | 1" × 1" × 1" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 1x6 24" | 1 board | ☐ |
| Board, 2x2 36" | 2 board | ☐ |
| Square Dowel, 1" x 1" 36" | 1 board | ☐ |
| 1 1/4" fine-thread pocket-hole screws | 4 each | ☐ |
| #8 x 2 1/2" flat-head wood screw | 4 each | ☐ |
| Lamp hardware kit | 1 each | ☐ |
| Lamp shade (approx. 14" square at base) | 1 each | ☐ |
| 45° Chamfer Bit | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.