NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A three-legged jewelry tray with a plywood base and thin dowel rails for hanging necklaces and bracelets in view.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Uprights | 3 | 3/4" × 3/4" × 14 1/2" | 3/4" square dowel | ☐ |
| Upright laminate strips | 6 | 3/4" × 2 1/2" × 2 3/8" | Pine 1x3 | ☐ |
| Top rail | 1 | 3/4" × 3/4" × 15" | 3/4" square dowel | ☐ |
| Tray sides | 2 | 3/4" × 2 1/2" × 15" | Pine 1x3 | ☐ |
| Base | 1 | 1/4" × 7 1/2" × 15 1/2" | 1/4" plywood | ☐ |
| Legs | 4 | 3/4" × 3/4" × 1/2" | 3/4" square dowel | ☐ |
| Small trim details | 6 | 1/4" × 1" × 5 1/2" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" square wood dowel (1x1), 5 ft | 1 each | ☐ |
| Pine, 1x3, 4 ft | 1 each | ☐ |
| 1/4" plywood, at least 16" x 12" | 1 each | ☐ |
| Brad nails, 1-1/4" and 3/4" | 1 box | ☐ |
| Hot glue Recommended for the small trim pieces. | 1 each | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Brad Nailer, Spring Clamps. Materials: 3/4" square wood dowel (1x1), 5 ft, Pine, 1x3, 4 ft, Wood glue
Attach a 1x1 dowel upright to one of its 1x3 laminate strips with glue and 1-1/4" brad nails. Glue and clamp the second 1x3 strip to the other side of the upright, then angle-nail from the 1x3 into the dowel for extra hold. Let each upright dry fully before moving on — build all three this way.
Tools: Brad Nailer. Materials: 3/4" square wood dowel (1x1), 5 ft, Pine, 1x3, 4 ft, Wood glue
Attach the side rails to the uprights to form the tray, using glue and 1-1/4" nails. Attach the top dowel rail across the top of the uprights with 1-1/4" nails and wood glue.
Tools: Brad Nailer. Materials: 1/4" plywood, at least 16" x 12", Wood glue
Attach the plywood base with even overhangs on all sides, using 3/4" brad nails and wood glue.
Tools: Brad Nailer. Materials: 3/4" square wood dowel (1x1), 5 ft, Wood glue
Attach the small leg blocks with 1-1/4" brad nails and wood glue, lining them up with the sides of the jewelry tray above — not the edges of the plywood base, which overhangs on purpose.
Tools: Random Orbit Sander. Materials: Hot glue
Sand any rough edges and finish as desired. Hot glue works well for attaching any small decorative trim details.