NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A slatted 1x2 crate with a loose, unfastened bottom you can pull out to dump and rinse — built from a single board and a bundle of wood lath.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 3/4" × 1 1/2" × 6 1/2" | 1x2 | ☐ |
| Bottom supports Joins the legs at the bottom, pocket-holed. | 2 | 3/4" × 1 1/2" × 13 3/4" | 1x2 | ☐ |
| End slats | 6 | 1/4" × 1 3/8" × 8 3/4" | Wood lath | ☐ |
| Side slats Cut to fit the assembled box rather than to this exact length — lath dimensions vary. | 6 | 1/4" × 1 3/8" × 15 3/4" | Wood lath | ☐ |
| Bottom slats Loose, unfastened — lifts out for cleaning. | 8 | 1/4" × 1 3/8" × 8 3/4" | Wood lath | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x2, 8 ft Legs and bottom supports, per crate. | 1 each | ☐ |
| Wood lath, 4 ft pieces Sold in bulk bundles of ~50 — this is the per-crate usage. 1x2 scrap works as a substitute. | 5 each | ☐ |
| Pocket hole screws, 1-1/4" | 8 each | ☐ |
| Brad nails, 3/4" | 30 each | ☐ |
| Wood glue | 1 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.