NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A compact console table with a decorative X brace built into the back — one angled cut defines the whole look, everything else is a straightforward 2x4 frame.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1 1/2" × 3 1/2" × 28 1/2" | Pine | ☐ |
| Front and back trim | 4 | 1 1/2" × 1 1/2" × 24" | Pine | ☐ |
| End trim Cut to match the actual width of the 1x12 shelf boards. | 4 | 1 1/2" × 3 1/2" × 11 1/4" | Pine | ☐ |
| X brace, long diagonal Both ends cut at 45°, ends ARE parallel — long point to short point measurement. | 1 | 1 1/2" × 1 1/2" × 31" | Pine | ☐ |
| X brace, short diagonals One end cut at 45°, long-point measurement. | 2 | 1 1/2" × 1 1/2" × 15 1/2" | Pine | ☐ |
| Top boards | 3 | 1 1/2" × 5 1/2" × 32" | Pine | ☐ |
| Shelf | 1 | 3/4" × 11 1/4" × 24" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 2x6, 8 ft | 1 each | ☐ |
| Pine, 2x2, 8 ft | 2 each | ☐ |
| Pine, 2x4, 8 ft | 2 each | ☐ |
| Pine, 1x12, 24 in | 1 each | ☐ |
| Pocket hole screws, 2-1/2" | 1 box | ☐ |
| Wood glue | 3 oz | ☐ |
| Sandpaper, assorted grit | 3 sheet | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.