NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A compact wall-hung shelf with angled 2x6 sides, a slatted plank back, and six hooks — the pallet-wood look without needing an actual pallet.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides Top corner cut off at 45°. | 2 | 1 1/2" × 5 1/2" × 17 1/2" | Pine 2x6 | ☐ |
| Bottom | 1 | 1 1/2" × 5 1/2" × 47 3/4" | Pine 2x6 | ☐ |
| Shelf | 1 | 3/4" × 5 1/2" × 44 3/4" | Pine 1x6 | ☐ |
| Back boards | 3 | 3/4" × 5 1/2" × 47 3/4" | Pine 1x6 | ☐ |
| Front shelf/hook board | 1 | 3/4" × 3 1/2" × 47 3/4" | Pine 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x6, 8 ft | 2 each | ☐ |
| Pine, 1x4, 4 ft | 1 each | ☐ |
| Pine, 2x6, 8 ft | 1 each | ☐ |
| Pocket hole screws, 1-1/4" and 2-1/2", or self-tapping wood screws | 1 box | ☐ |
| Self-tapping wood screws, 2" | 1 box | ☐ |
| Wood glue | 3 oz | ☐ |
| Wall hooks | 6 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Pocket Hole Jig. Materials: Pine, 1x6, 8 ft, Pine, 2x6, 8 ft, Pocket hole screws, 1-1/4" and 2-1/2", or self-tapping wood screws
Attach the bottom to the sides with either pocket holes (set for 1-1/2" stock, 2-1/2" pocket hole screws) or 2-1/2" wood screws countersunk. Attach the shelf to the sides the same way, using the 3/4" pocket hole setting and 1-1/2" pocket hole screws if using a jig.
Tools: Drill / Driver. Materials: Pine, 1x6, 8 ft, Self-tapping wood screws, 2"
Attach the back boards to the sides and shelf with 2" screws and glue. Use screws here specifically, not nails — this is what the whole piece hangs from, and nails can work loose under repeated coat-hanging weight.
Tools: Drill / Driver. Materials: Pine, 1x4, 4 ft, Self-tapping wood screws, 2", Wall hooks
Attach the front 1x4 board with 2" screws and glue, then attach the hooks to it. Hang the whole piece into at least two wall studs with wood screws through the back — a loaded coat rack is heavier than it looks, and drywall anchors alone aren't reliable for that weight.