Small Bathroom Vanity

Build two sets of legs and side rails. Attach rails to legs as shown.

Connect the two leg sections with the top rails. Nail on the bottom shelf boards.

• Build two 2x3 frames as shown for top section of vanity.
• Cut corners at a 45 degree miter.
• Attach with pocket holes and finish nails.

Build a 1x3 frame as shown using 45 degree bevel cuts. Attach with wood glue and 2'' finish nails.

Using 3/4'' pocket holes and 1 1/4'' pocket hole screws attach the 1x3 frame to the 2x3 top frame as pictured.

Attach the bottom 2x3 frame to the 1x3 frame with 2 1/2'' or 3'' screws, make sure to pre-drill first.

For the decorative top cut your plywood and attach the 3/4'' wood to the top as pictured with wood glue and finish nails, nail from bottom. You may vary the pattern as desired.

Drill 2 1/2'' pocket holes into the plywood side of the insert and attach it inside of the top 2x3 frame.

• Attach the base of your vanity to the top with 3'' screws as shown.
• Cut any holes into the top of the vanity for your sink with a jigsaw. Install sink according to factory directions and enjoy!

Here are the finished dimensions of the small bathroom vanity.

For more details and picture tutorial of this project visit, http://www.mylove2create.com/2016/09/small-bathroom-vanity.html