NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A reclining outdoor lounge chair with a pivot-bolted backrest that adjusts against a stop block — a genuinely mechanical outdoor chair, not just a fixed-angle lounger.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Main frame sides | 2 | 1 1/2" × 5 1/2" × 85" | 2x6, 9 ft or stud length | ☐ |
| Main frame front/back | 2 | 1 1/2" × 5 1/2" × 21" | 2x6, 9 ft or stud length | ☐ |
| Seat slats | 16 | 3/4" × 2 1/2" × 24" | 1x3, 8 ft | ☐ |
| Legs, tall | 6 | 1 1/2" × 3 1/2" × 14" | 2x4, 8 ft | ☐ |
| Legs, short | 2 | 1 1/2" × 3 1/2" × 7" | 2x4, 8 ft | ☐ |
| Back frame sides | 2 | 1 1/2" × 3 1/2" × 32" | 2x4, 8 ft | ☐ |
| Back frame rails | 3 | 1 1/2" × 3 1/2" × 17 1/2" | 2x4, 8 ft | ☐ |
| Back slats | 7 | 3/4" × 2 1/2" × 37 1/2" | 1x3, 8 ft | ☐ |
| Stop block | 1 | 1 1/2" × 3 1/2" × 24" | 2x4, 8 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x6, 9 ft or stud length | 2 each | ☐ |
| 2x4, 8 ft | 3 each | ☐ |
| 1x3, 8 ft | 8 each | ☐ |
| 1/4" bolts, 4 in, with nuts and washers | 2 each | ☐ |
| Self-tapping exterior wood screws, 2-3/4" | 40 each | ☐ |
| Exterior screws, 2", or galvanized brad nails and glue | 60 each | ☐ |
| Primer and paint, or exterior stain | 1 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.