NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A three-board tabletop on a pocket-hole apron and four 2x2 legs — the whole build from one 1x8, one 2x2, and one 1x3, and a fair first project for a pocket-hole jig.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Tabletop boards If ripping from a 96"-long board, cut at 31-7/8" to account for saw-blade kerf across three cuts. | 3 | 3/4" × 7 1/2" × 32" | 1x8 | ☐ |
| Legs | 4 | 1 1/2" × 1 1/2" × 21 1/4" | 2x2 | ☐ |
| End aprons | 2 | 3/4" × 2 1/2" × 17 1/2" | 1x3 | ☐ |
| Side aprons If your 1x8s measure narrower than 7-1/2" actual width, take the difference, multiply by three, and subtract that from this length. | 2 | 3/4" × 2 1/2" × 27" | 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x8, 8 ft The tabletop — measure the actual board width before finalizing the apron length. | 1 each | ☐ |
| 2x2, 8 ft The four legs. | 1 each | ☐ |
| 1x3, 8 ft End and side aprons. | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 30 each | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.