NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A four-legged stool with every leg splayed 5° in two directions at once — a small double-bevel angle that's easy to lose track of unless you mark each leg's inside corner before cutting anything else.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs Ends cut at a 5° angle AND a 5° bevel simultaneously — mark each leg's inside corner before cutting. | 4 | 1 1/2" × 1 1/2" × 23 1/4" | 2x2 | ☐ |
| Short rungs Short point to short point, ends cut at a 5° angle, NOT parallel to each other. | 4 | 3/4" × 1 1/2" × 7" | 1x2 | ☐ |
| Top supports, long Short point to short point, ends at 5°, NOT parallel. | 2 | 3/4" × 1 1/2" × 10" | 1x2 | ☐ |
| Top supports, medium Short point to short point, ends at 5°, NOT parallel. | 2 | 3/4" × 1 1/2" × 8 1/4" | 1x2 | ☐ |
| Rungs, secondary Short point to short point, ends at 5°, NOT parallel. | 2 | 3/4" × 1 1/2" × 9 1/2" | 1x2 | ☐ |
| Rungs, lower Short point to short point, ends at 5°, NOT parallel. | 2 | 3/4" × 1 1/2" × 8" | 1x2 | ☐ |
| Seat Cut to a square matching the actual width of your 1x12, or use a 12" plywood round instead. | 1 | 3/4" × 11 1/2" × 11 1/2" | 1x12 or plywood round | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x2, 8 ft | 1 each | ☐ |
| 1x2, 10 ft | 1 each | ☐ |
| 1x12, 11-1/2" (or 12" plywood round, 3/4" thick) The seat. | 1 each | ☐ |
| Self-tapping screws, 2-1/2" (for countersinking), or pocket hole screws, 1-1/4" | 20 each | ☐ |
| Wood glue, wood filler, sandpaper, and finishing supplies | 1 set | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.