NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A slatted outdoor chair with 2x4 back legs sized to nest with identical chairs for stacking, built from 1x4 seat and back slats on a simple 2x2 leg-and-apron frame.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Chair backs (legs) One leg uses the full board width; cut a consistent 1-1/2" profile for stackability. | 2 | 1 1/2" × 1 1/2" × 30" | Pine 2x4 | ☐ |
| Chair back supports | 2 | 1 1/2" × 1 1/2" × 19 1/2" | Pine 2x2 | ☐ |
| Chair front legs | 2 | 1 1/2" × 1 1/2" × 18" | Pine 2x2 | ☐ |
| Side aprons | 2 | 3/4" × 2 1/2" × 17 1/2" | Pine 1x3 | ☐ |
| Front apron | 1 | 3/4" × 2 1/2" × 16 1/2" | Pine 1x3 | ☐ |
| Back apron | 1 | 3/4" × 2 1/2" × 18" | Pine 1x3 | ☐ |
| Seat boards | 5 | 3/4" × 3 1/2" × 19" | Pine 1x4 | ☐ |
| Back boards | 5 | 3/4" × 3 1/2" × 15" | Pine 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x4, 8 ft | 2 each | ☐ |
| Pine, 2x2, 8 ft | 1 each | ☐ |
| Pine, 2x4, 8 ft | 1 each | ☐ |
| Pine, 1x3, 8 ft | 1 each | ☐ |
| Wood screws, 2" | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
| Wood filler | 1 can | ☐ |
| Exterior paint | 1 can | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.