NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A minimal four-board console with an inset 1x10 back panel between the legs — just a top, two legs, a shelf, and a recessed back board, no additional bracing anywhere.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 2 | 3/4" × 11 1/4" × 29 1/4" | 1x12, 12 ft (pine or whitewood) | ☐ |
| Top | 1 | 3/4" × 11 1/4" × 48" | 1x12, 12 ft (pine or whitewood) | ☐ |
| Shelf | 1 | 3/4" × 11 1/4" × 46 1/2" | 1x12, 12 ft (pine or whitewood) | ☐ |
| Back panel | 1 | 3/4" × 9 1/4" × 46 1/2" | 1x10, 4 ft (pine or whitewood) | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 12 ft (pine or whitewood) | 1 each | ☐ |
| 1x10, 4 ft (pine or whitewood) | 1 each | ☐ |
| Brad nails, 1-1/4", or pocket hole screws, 1-1/4" | 40 each | ☐ |
| Wood glue | 3 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.