NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A three-board console with a dowel rack slung underneath for quilts or towels. Almost no cutting — the one real step is a clean hole for the rod.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top / long sides No cutting needed if boards come at 72". | 2 | 3/4" × 9 1/4" × 72" | 1x10 | ☐ |
| Ends and center divider Center one gets the dowel hole. | 3 | 3/4" × 9 1/4" × 24" | 1x10 | ☐ |
| Quilt rod 1" diameter. Cut to the measured distance between ends last. | 1 | 1" × 1" × 70 1/2" | Dowel | ☐ |
| Feet | 6 | 1 1/2" × 1 1/2" × 4" | 2x2 or scrap | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x10 board, 6 ft (Pine) Top and two ends, plus the center divider. | 3 each | ☐ |
| Dowel rod, 1" dia, 6 ft The quilt rod. Cut to fit last. | 1 each | ☐ |
| 2x2 or scrap for feet, 24" Six 4" blocks. 4x4 offcuts or short legs also work. | 1 each | ☐ |
| Wood screws, 3/4" | 50 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.