NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A slim hallway shoe dresser with two tilt-out bins on wood dowel pivots — plank door faces, belt-strap limiters, and a wall cleat that keeps it honest when the bins swing open.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Door faces Two per door. Board widths vary — the box is sized off the finished doors. | 4 | 3/4" × 7 1/4" × 47" | 1x8 | ☐ |
| Middle shelf | 1 | 3/4" × 7 1/4" × 47 1/4" | 1x8 | ☐ |
| Top and bottom | 2 | 3/4" × 7 1/4" × 48 3/4" | 1x8 | ☐ |
| Sides APPROXIMATE — figured from your doors' real height plus gaps (step 4). | 2 | 3/4" × 7 1/4" × 31" | 1x8 | ☐ |
| Bin bottoms | 2 | 3/4" × 5 1/2" × 47" | 1x6 | ☐ |
| Bin dividers Approximate — cut to door height, corners rounded to clear the tilt. | 6 | 3/4" × 5 1/2" × 14" | 1x6 | ☐ |
| Bin backs | 4 | 3/4" × 1 1/2" × 47" | 1x2 | ☐ |
| Wall cleat Screwed to a STUD. This is the anti-tip anchor. | 1 | 3/4" × 1 1/2" × 47 1/4" | 1x2 | ☐ |
| Front legs Your baseboard height + 1" — the cabinet leans back against the wall above the baseboard. | 2 | 1 1/2" × 1 1/2" × 5" | 2x2 | ☐ |
| Front apron | 1 | 3/4" × 1 1/2" × 44 3/4" | 1x2 | ☐ |
| Side aprons | 2 | 3/4" × 1 1/2" × 5" | 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x8, 8 ft Door faces, shelf, top, bottom, sides. | 4 each | ☐ |
| 1x6, 8 ft Bin bottoms and dividers. | 2 each | ☐ |
| 1x2, 8 ft Bin backs, cleat, and aprons. | 3 each | ☐ |
| 2x2 scrap Front legs — cut to your baseboard height + 1". | 1 each | ☐ |
| Wood dowel pins, 3/8" x 1-1/2" The pivots. Two sets of traditional hinges substitute. | 4 each | ☐ |
| Used fabric belt or strap Cut into four bin-stop straps. The recycling is the point. | 1 each | ☐ |
| Magnetic cabinet clasps Mounted at the sides for a tight closed fit. | 4 each | ☐ |
| Knobs or pulls | 2 each | ☐ |
| Screws, 2", or pocket hole screws, 1-1/4" | 50 each | ☐ |
| Self-tapping screws, 1-1/4" | 30 each | ☐ |
| Brad nails, 2" | 50 each | ☐ |
| Wood glue | 6 oz | ☐ |
| Paint or stain | 1 qt | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.