NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
An outdoor dining table on two angled sawhorse-style legs, with a compound-angle center cross support — a distinct base system from the trestle and pedestal tables elsewhere here.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sawhorse legs Long point to short point, both ends cut 10° bevel. | 8 | 1 1/2" × 5 1/2" × 27 3/8" | 2x6, 8 ft | ☐ |
| Angled stretchers Long point to long point, both ends cut 45° bevel, ends not parallel. | 3 | 1 1/2" × 3 1/2" × 39 1/2" | 2x4, 8 ft | ☐ |
| Base supports, short Long point to long point, both ends cut 10° off square, ends not parallel. | 4 | 1 1/2" × 5 1/2" × 7 7/8" | 2x6, 8 ft | ☐ |
| Base supports, straight | 2 | 1 1/2" × 5 1/2" × 26" | 2x6, 8 ft | ☐ |
| Tabletop boards | 4 | 1 1/2" × 5 1/2" × 88" | 2x6, 8 ft | ☐ |
| Cross supports Both ends beveled, one at 40° and one at 50° (or both at 45° as a fallback). | 5 | 1 1/2" × 3 1/2" × 34" | 2x4, 8 ft | ☐ |
| Optional table frame Cut to fit around the tabletop. | 4 | 1 1/2" × 3 1/2" × 88" | 2x4, 8 ft (optional table frame) | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x6, 8 ft | 9 each | ☐ |
| 2x4, 8 ft | 7 each | ☐ |
| 2x4, 8 ft (optional table frame) | 3 each | ☐ |
| Pocket hole screws, 2-1/2" | 60 each | ☐ |
| Self-tapping screws, 2-1/2" | 40 each | ☐ |
| Wood glue | 5 oz | ☐ |
| Primer and paint, or exterior stain | 1 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.