NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Solid 4x4 posts trimmed with mitered lattice and moulding at top and bottom — a fast, satisfying small build in a set of graduated heights.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Post Cut to desired height — 3.5", 4.5", and 5" shown as a graduated set. | 1 | 3 1/2" × 3 1/2" × 4 1/2" | Pine or cedar 4x4 | ☐ |
| Bottom trim Long point to long point, both ends 45° miter, ends not parallel. | 4 | 1/4" × 7/8" × 4" | Flat lattice | ☐ |
| Top trim Long point to long point, both ends 45° miter, ends not parallel. | 4 | 1/2" × 3/4" × 4 3/8" | Flat moulding | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine or cedar, 4x4, scrap Cut to your desired holder height(s). | 1 each | ☐ |
| Flat lattice, 1/4" x 7/8" | 2 ft | ☐ |
| Flat moulding, 1/2" x 3/4" | 2 ft | ☐ |
| Brad or pin nails, 1" | 1 box | ☐ |
| Wood glue | 1 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.