NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A plywood router table fence with slotted support walls, so the face plates slide to fit different bit widths.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Fence base | 1 | 3/4" × 5" × 36" | 3/4" plywood | ☐ |
| Slotted support walls | 2 | 3/4" × 5" × 15" | 3/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, partial sheet | 1 sheet | ☐ |
| Universal t-track, 36" | 1 each | ☐ |
| Knobs and t-track bolts, 1/4" | 1 set | ☐ |
| Carriage bolts, 3/8" x 2" | 4 each | ☐ |
| Washers and wing nuts | 1 set | ☐ |
| Wood screws, 1-1/2" | 10 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Table Saw. Materials: 3/4" plywood, partial sheet
Cut the fence base from 3/4" plywood and drill mounting holes sized to your t-track bolts.
Tools: Router, Table Saw. Materials: 3/4" plywood, partial sheet
Cut the two support walls and rout a 3/8in adjustment channel in each so the face plates can slide.
Tools: Drill / Driver. Materials: Carriage bolts, 3/8" x 2", Washers and wing nuts
Assemble the support walls to the base with carriage bolts, washers, and wing nuts so the face plates can slide and lock at any position.
Tools: Drill / Driver. Materials: Universal t-track, 36", Wood screws, 1-1/2"
Install the t-track sections, including a horizontal track above the face plates for mounting bit guards, stops, and featherboards.
Tools: Drill / Driver. Materials: Knobs and t-track bolts, 1/4"
Attach the adjustable face plates to the support walls with knobs and t-track bolts.